AQC MAXIREACH EBS-605 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Industrielle Ausrüstung AQC MAXIREACH EBS-605 herunter. AQC MAXIREACH EBS-605 16 Seiten. Pivoting extension boom

Seite drucken

The MAXIREACH swing boom is shipped partly assembled but requires minimal final field assembly.

Because of carrier restrictions, swing booms horizontal steel tubes longer than 10' (3 meters) are

shipped in two (2) pieces. A joiner with fasteners is included for field assembly.

5 OPERATION AND PURPOSE

During normal operation, the MAXIREACH swing boom is pulled or pushed into position for source

capture to vacuum dust or smoke laden air into the attached equipment such as the MAXAIR fume

arm. Particles are vacuumed into the equipment toward an exhaust fan and into a dust collector

or exhausted outside (when permitted).

6 NORMAL USE

The MAXIREACH swing boom is designed to remove fumes, gases or dust from the air resulting

from a fabrication process. Each MAXIREACH swing boom is built as per the criteria and information

supplied by the customer for a specific application and should not serve any other application

without the approval of A.Q.C. Inc.

The Maxireach swing boom is shipped partly

assembled but requires minimal final field

assembly. Because of carrier restrictions, swing

booms horizontal steel tubes longer than 10'

(3 meters) are shipped in two (2) pieces.

A joiner with fasteners is included for field

assembly.

METAL SLEEVE (SECURE WITH METAL

SCREWS AND DUCT TAPE OR SILICONE FOR

MINIMAL AIR LEAKS)

WELDED JOINER ON FIRST

HORIZONTAL BEAM

JOINER WITH FASTENERS

HORIZONTAL SUPPORT TUBES

Pivoting Extension Boom

ALIGN BOLT HOLES ON SECOND

BEAM WITH HOLES ON JOINER