Aqua J-8010 Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schwimmbad-Filter Aqua J-8010 herunter. Aqua J-8010 16 Seiten. Integrated swimming pool filter system (pipeless filter). no plant room, no buried pipeline and no balancing tank required
Seite drucken1. In order to prevent severe damage to the unit, never power on the unit when it is outside of the
swimming pool.
2. The power cord must be connected to an appropriate earthed socket.
3. Do not operate the unit when people are in the pool.
4. Ensure the drainage pipe for technical compartment leakage is pre-buried.
5. For optimal performance, before power on make sure that there is no air left inside the unit
(full of the water through priming jet which is inside of the unit).
6. Do not try to lower the unit down to the level of the ground. Install them always above the
ground according to the installation guidance.
7. Before power on, make sure the unit is connected well with the control panel, which could
affect the unit's performance or cause damage.
8. The filter bags should be cleaned every time you use the unit. This will prevent that the dirty
filter bags affect the normal operation of the unit.
9. The unit should be stored in a cool and ventilated place or protected with cover, away from
direct sunlight, when not in use.
10. The control panel should be placed indoor area. In order to avoid raining and the potential
damage of components, never cover the control panel with wet items.
11. Only authorized after sales service personnel should open the technical compartment and the
control panel, otherwise the warranty will be invalidated.
12. In order to avoid any accident, it is strongly recommended to connect the handrail with the unit
(included in the box) for the safety of going up and down the pool.
13. Do not use the unit beyond the working environment/conditions stated in this manual.
Please read the instruction manual carefully before use and keep it for future
reference.
Important Precautions
4