Aqua J-8010 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schwimmbad-Filter Aqua J-8010 herunter. Aqua J-8010 16 Seiten. Integrated swimming pool filter system (pipeless filter). no plant room, no buried pipeline and no balancing tank required

Seite drucken

technical compartment (back vac.port).get the vacuum hose to be well connected

with front port and turn the valve inside of the filtration system to correct position, start

the motor to begin the vacuum. (Fig. 6)

2. Delivery/Return

Connect the port at the side of technical compartment to plumbing system around the

pool and close the port at the side of the filtration system. Turn on the motor to start

filtering to deliver /return the water. (Fig. 6)

 Basic Operation Guiding

POWER: (This switch cannot shut down the general power, please shut down the

general power if long time no uses our unit).

Press "POWER" button， the unit will work and the indicator above the button will be

on in red.

① When the pump working

will display content same

Fig. 7

② If no setting, pump will keep manual working mode as default, at this time we can

"PUMP" Button to switch on/off pump.

Press

③ When Pump working mode is Auto, screen will display the content same as below

Vacuum Discharge Port

or Delivery /Return Port

Vacuum Suction Port or

Delivery /Return Port

Fig. 6

Instruction Of The Control Panel

mode is manual, screen

as below (Fig. 7)