Dexing NDS3244S Benutzerhandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medienkonverter Dexing NDS3244S herunter. Dexing NDS3244S 20 Seiten. Multi-channel encoder
Seite druckenNDS3244S Multi-Channel Encoder User Manual
Chapter 3 WEB NMS Operation
NDS3244S does not support front buttons and LCD, users can only control and set the
configuration in computer by connecting the device to web NMS Port. User should ensure that
the computer's IP address is different from the NDS3244S IP address; otherwise, it would
cause IP conflict. This user manual will take module 1 as an example.
3.1 login
The default IP address of NDS3244S (3 NMS ip addresses for 3 modules respectively) is
10.0.0.101, 10.0.0.102 and 10.0.0.103.
The module which closes to power is 10.0.0.101
Connect the PC (Personal Computer) and the device with net cable, and use ping command to
confirm they are on the same network segment.
I.G. the PC IP address is 192.168.99.252, we then change the device IP to 192.168.99.xxx (xxx
can be 0 to 255 except 252 to avoid IP conflict).
Use web browser to connect the device with PC by inputting the Encoder's IP address in the
browser's address bar and press Enter.
It will display the Login interface as Figure-1. Input the Username and Password (Both the
default Username and Password are "admin".) and then click "LOGIN" to start the device
setting.
Figure-1
3.2 Operation
When we confirm the login, it will display the WELCOME interface as Figure-2.
9