Aqua Computer Aquaduct 240 eco Betriebs- und Montageanleitung - Seite 13

Blättern Sie online oder laden Sie pdf Betriebs- und Montageanleitung für Computer Hardware Aqua Computer Aquaduct 240 eco herunter. Aqua Computer Aquaduct 240 eco 20 Seiten. Aquaduct eco series

Seite drucken

6.4. Examination and connection to the cooling system

Finally check again if the cooler rests plane on the core of the pro- - - -

Finally check again if the cooler rests plane on the core of the pro

cessor and does not touch the part of the socket in which the detach- - - -

cessor and does not touch the part of the socket in which the detach

ment mechanism is integrated.

WARNING: A cooler which does not rest plane on the core of the pro-

cessor can cause destruction of the processor in seconds when the

processor is switched on, since the heat-capacity of the core is too

small. Even TCS, BIOS or software shutdown tools can not prevent de-

struction in this case!

Now cut the hoses evenly to the needed length with a hose cutter or a

sharp knife and put them onto the connections of the cuplex. The pro-

cedure is described in chapter 4. Use of the plug&cool connectors.

The special tubes of the aquaducts must get separated before the use. It

can be helpful to separate the first millimeters with a knife. This area

must then be divided off.

6.5. Proper connection of cuplex kryos and cuplex PRO

outlet is crucial. When operated with reversed flow direction, the cooling

performance is significantly reduced.

Unlike channel coolers, the microstruc-

ture coolers cuplex kryos and cuplex

PRO have a predefined flow direction.

The coolant must be led in through the

central connection directly onto the mi-

crostructure, the coolant is then led out

through the lateral connection. In order

to attain the full performance of the wa-

terblock, correct connection of inlet and

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1, 37130 Gleichen, Germany

AQUADUCT ECO

- 13 -