Aqua Computer D5 Schnellstart-Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Computer Hardware Aqua Computer D5 herunter. Aqua Computer D5 8 Seiten.

Seite drucken

aqua

computer

In case the reservoir is installed without using the mounting plate of the pump, the

mounting plate and silicone damper of the pump can be replaced with a flat sili-

cone insert.

Please note that all mounting options that make use of the silicone damper require

the pump to be installed vertically above the damper and additionally the reservoir

to be firmly secured to the PC case! The silicone damper of the pump is not de-

signed to withstand lateral stress or transportation of the PC!

4.2. Electrical connections

4.2.

Electrical connections

4.2.

Electrical connections

ATTENTION: Completely turn off your power supply or disconnect the mains pow-

er cord from the wall outlet before connecting or disconnecting any cables to/from

the device!

4.3. Power Connector

4.3.

Power Connector

Connect a SATA power plug of your PC's power supply unit to this connector. Do

not use excessive force but double check the polarity of the plug if you are having

trouble to connect.

Pin assignment:

Pin 1, 2, 3, 11:

Pin 4, 5, 6, 10, 12:

Pin 7, 8, 9:

Pin 13, 14, 15:

4.4. Connector "USB"

4.4.

Connector "USB"

4.4.

Connector "USB"

This connector is used for USB communication with a PC. Connect to an internal

USB header of your motherboard. Take special care to make sure the pin align-

ment matches your motherboard! The USB interface is used for data exchange

with the PC and not required for pump operation.

Pin assignment:

Pin 1: GND (black, optional)

Pin 2: GND (black)

Pin 3: D+ (green)

Pin 4: D-

Pin 5: +5 V (red)

4.5.

4.5. Connector "Fan" for fan or flow sensor

Connector "Fan" for fan or flow sensor

4.5.

Connector "Fan" for fan or flow sensor

Depending on configuration, this connector can either be used as a PWM regulat-

ed fan output with speed signal processing or to connect a flow sensor. Simultane-

ous use of both functions is not possible!

Pin assignment:

Pin 1: GND

Pin 2: 12 V / max. 25 W

Pin 3: Speed signal

Pin 4: PWM signal

not connected

GND

5 V DC

12 V DC

(white)

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1, 37130 Gleichen

ULTITUBE D5

- 5 -