AvLab PCMCIA 2S Handbuch zur Schnellinstallation - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Adapter AvLab PCMCIA 2S herunter. AvLab PCMCIA 2S 9 Seiten.

1. Insert the PCMCIA PC Card Adapter into an available PCMCIA

PC Card Type II/III slot with the arrow orientation pointing

towards the slot.

2. Plug the serial port cable into the PCMCIA PC Card Adapter.

3. Hardware installation is completed. Please proceed to the next section

for software installation.

2-2 Software Installation

Throughout driver installation, you may be prompted to insert your

Windows installation CD. Some files on this CD are necessary to

complete the driver installation. Please insert the CD when prompted

and follow on-screen instructions.

For PCMCIA 1S Adapter:

1. After hardware installation is completed, boot up your system.

2. At the Add New Hardware Wizard, click Next, Next.

3. Insert the driver CD into your CD-ROM drive.

4. Check the Specify a location: and type E:\1S then click Next.

(Assume E: is your CD-ROM drive)

5. When COM CARD appears, click Next, then click Finish.

6. Remove the driver CD, then restart your system

to complete driver installation.

For PCMCIA 2S Adapter:

1. After hardware installation is completed, boot up your system.

2. When Add New Hardware Wizard displays Elan-Serial Port

CF332-DEV0, click Cancel, Cancel.

3. Insert the driver CD into your CD-ROM drive.

4. Double click Serialsetup from driver CD of 2S folder.