AAVIX AGT310 Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Metalldetektor AAVIX AGT310 herunter. AAVIX AGT310 17 Seiten. 2x9v smart metal detector

with the ground

If the detector detects the item, it sounds a tone, and the cursor

above the target name will light. Also LCD displays the numeric

range of target as well as the depth (signal strength).

If the detector does not detect the item, make sure that the

mode is set correctly for the type of metal you're searching for.

Also make sure that you're moving the search coil correctly.

Notes:

The detector responds with a signal when it detects most

valuable metal objects. If a signal does not repeat after you

sweep the search coil over the target a few times, the

target is probably junk metal.

False signals can be caused by trashy ground, electrical

interference, or large irregular piece of junk metal.

False signals are usually broken or non-repeatable.

Adjusting SENSITIVITY

After you become familiar with how your detector works, it's

important to ﬁne tune the sensitivity to get a good eﬀect.

Press the touch button SENS on the panel. Then press + or – to

increase or decrease the sensitivity. The level will be displayed

on the LCD.

Note:

In order to detect the target deeply buried, you can adjust the

SENS to a high position. But not to set the level of SENS to Max