Aqua Computer multiswitch 1.41 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Computer-Zubehör Aqua Computer multiswitch 1.41 herunter. Aqua Computer multiswitch 1.41 12 Seiten. Firmware-version 1.06 os- version 1.02

Seite drucken

5. Configuration

Via the five configuration-

jumpers (see chapter 4.5.

Jumper)

you

permanently

single

functions

multiswitch™.

purpose the included short-

circuit-bridges

are either removed from the

contact pins (position „open") or set on the contact pins (position

„closed").

The individual positions have the following functions:

Jumper position 1:

Jumper position 1: aquabus-address

Jumper position 1:

This jumper configures the aquabus-adress of the multiswitch™ when

connected as a aquabus-device e.g. to the aquaero. When connected

as a USB-device this function is ignored.

Jumper open:

Jumper closed:

Jumper position 2: Save configuration

When this jumper is set, the current condition of the outputs are saved

with each keypress (supprted only in devices with buttons) and

automatically loaded after a reset of the system . Additionally a save via

the PC-software aquasuite is possible. If this function is deactivated, so

is the function in the aquasuite software!

Jumper open:

Jumper closed:

Jumper position 3: Deactivate PWM function

This jumper configures the output of PWM signals at the outputs of the

multiswitch™. In the default setting (jumper open) PWM signals are

generated at the outputs which allow for instance LEDs to be controlled

in brightness. You must

can

configure

the

For

this

(„jumper")

aquabus-address

Address multiswitch™ 1

Address multiswitch™ 2

Saving deactivated

Speichern activated

must check if all all all all connected devices are able to

must

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1, 37130 Gleichen

MULTISWITCH

- 9 -