AVLink HDM-ERC Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Extender AVLink HDM-ERC herunter. AVLink HDM-ERC 2 Seiten. Local/remote

Seite drucken
Installation
1. Turn off the DVD and HDTV.
2. Connect the HDMI extension cable between the DVD
and the "HDMI IN" port of HDM-SLC or HDM-ELC.
3. Connect the HDMI extension cable between the HDTV
and the "HDMI OUT" port of HDM-SRC or HDM-ERC.
4. Connect the CAT.5E cables between the HDM-SLC or
HDM-ELC "LINK" port and the HDM-SRC or HDM-ERC
"LINK" port of extender.
5. Connect the power cord and turn on the extender.
6. Turn on the DVD and HDTV.
IR Receiver Cable Directions:
Put it into the HDM-SRC or HDM-ERC "IR IN" port and
place the IR Receiver Cable, so that you can point to it
easily with your IR remote controller.
IR Blaster Cable Directions:
Plug IR blaster cable plug into HDM-SLC or HDM-ELC "IR
OUT" port, It sits in front of the DVD receiver's IR sensor,
which is located on the front-panel.
Additional Options
Select any additional options you may require.
1. IR Receiver Cable
GND
+V
Sig
2. IR Blaster Cable
NC
P+
N-
-3-
Technical Specifications Output Signal
Pin #
Signal
Pin #
1
11
TMDS Data 2+
2
TMDS Data 2 Shield
12
3
TMDS Data 2-
13
4
TMDS Data 1+
14
5
15
TMDS Data 1 Shield
6
16
TMDS Data 1-
7
TMDS Data 0+
17
8
TMDS Data 0 Shield
18
9
19
TMDS Data 0-
10
TMDS Clock+
Wiring Information & Coding
Conductor
RJ45 Pin
Identification
Assignment
5
Pair 1
4
1
Pair 2
2
3
Pair 3
6
7
Pair 4
8
-4-
Note
However sometimes, especially in demonstrations or in a
lab environment, the cable is rolled randomly in small turns
for convenience. The randomly rolled UTP cable suffers
additional signal impairments (compared to a straight cable)
and therefore the maximal operating reach might be
reduced.
Rolling a CAT5E cable around a 70M fixed diameter plastic
drum has just a minor effect on the FEXT (Far End Cross
Talk) when compared to a fully stretched
cable.
Signal
TMDS Clock Shield
TMDS Clock -
CEC
Reserved
(N.C. on device)
SCL
SDA
DDC/CEC Ground
+5 Power
Hot Plug Detect
Color Code for
Conductor
White-Blue
Blue
White-Orange
Orange
White-Green
Green
White-Brown
Brown
© AV LINK GROUP LTD., All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.
-5-