Aqua Control C4067 Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Handbuch für Irrigation System Aqua Control C4067 herunter. Aqua Control C4067 6 Seiten. Autonomous irrigation set
Seite druckenC4067
AUTONOMOUS Irrigation Set
Made to take care of your plants while you worry only about enjoying
C4067 irrigation kit is an automatic irrigation controller, which can pump water from a bottle or tank, and deliver water via pipe and dripper system
to water up to 10 plants.
TECHNICAL DATA:
• Voltaje de trabajo: 3.7V,2000mAh.
Built-in rechargeable lithium-ion battery.
• Working current: ≤500mA
• Standby current: ≤100UA
• Battery charging port:: Micro-USB.
• Water pumping height: ≤ 2m.
• Elevation height: ≤ 2m.
• Flow rate: 100-250 ml/min.
OPERATION:
1. Connect controller to bottle or vase with adaptor if it is necessary.
2. Set up pipe and drippers in between all your plants.
3. Set up irrigation FREQUENCY: time span between two watering.
4. Set up DURATION: extension of the time you will be irrigating.
IMPORTANT: frequency in between irrigations must be a bigger value
than duration value.
5. How to use DELAY function: Press DELAY button for more than two
seconds to activate. Then, press DELAY button as many times as hours
you want to delay irrigation time. One press = one hour.
WATER SUPPLY:
Timer-pump is made to take water from almost any kind of bottle:
a) To adjust the unit to bigger bottles, like 4, 5 or more litters you must
use the adaptor included in the box.
b) Use the hunger included in the case you want to take water from other
water supplies like jerrycans, bathtubes or pots.
c) You can always use your toilet water tank to get unlimited water supply.
In that case irrigation limit is given by battery life.
EXTEND THE DURATION OF THE BATTERY:
You can use extra energy from a powerbank to extend the duration of the
system. Make same duration tests before leaving plants alone during your
holidays, to make sure of a good result. Total duration will depend of the
kind of powerbank used.
IMPORTANT: Please make sure powerbank is safe from water. Do not use
it outdoors. Humidity on the enviroment and sun could spoil it. At the same
time spoiled powerbank can spoil the unit too.
Please keep these instructions for future reference. You can also download them from our web page at any time: www.altadex.com/manuales-esquemas
ENGLISH
WATERING FREQUENCY:
1, 3, 6, 12, 24, 48 hours, 3, 4, 5, 6 o 7 days.
DURATION OF THE WATERING CYCLE:
0,5, 1, 3, 5, 6, 7, 8, 10, 12 o 15 minutes.
DO NOT USE WITH HOT WATER
Our most sincere thanks for purchasing Aqua Control products.
This timer is an Altadex S.A. product. www.altadex.com
ATTENTION
TIMING EXAMPLE:
Timing example for 5 minutes irrigation every day:
a) Turn Frequency dial to 24h. position. Turn Duration dial to 5 min
position.
b) Press the Delay button for at least 2 seconds until the LED light comes
on. Release the button. Press once, the LED light will flash once, which
means that the watering has been delayed by one hour. Repeat the
same operation until the desired time (in the example, you need to
press the button 5 times to delay watering 5 hours). The delay time can
be selected from 1 to 23 hours.
c) If you want to water 5 minutes each day and you want the first watering
to begin at 6:00 p.m., and now it is 1:00 p.m., you must delay or
postpone the start of watering for 5 hours, by pressing the DELAY
button 5 times.
d) Attention: Frequency or Duration dial should not be changed
after setting the DELAY option. Otherwise, the DELAY will be
canceled.
OBSERVATIONS:
1. The LED light flashes every 4 seconds by default, stating that the battery
has charge. If it flashes rapidly (one flash every second) it means that
the battery is low on charge. Use the USB cable to recharge it. With low
battery the timer will shut down for safety.
2. Button (
): if pressed for more than 5 seconds, it can be used as
an on/off button. If you press it for one second, it will enter manual
watering mode (the manual watering will turn off automatically after
15 minutes).
IPX5 CERTIFICATION:
The unit is designed with IPX5 certification against water ingress. Which
means it can withstand not powerful water jets or rain. Now, it can NOT
be submerged, but it can be used both, indoors and outdoors. When used
outdoors, it is recommended to place the timer in a high place with respect
to the ground and NEVER with the programming console facing upwards,
as there will be standing water that, over time, could end up entering the
unit.
MORE IMPORTANT PRECAUTIONS:
Prolong the life of the product you have just bought, leaving it protected
from the sun and rain.
Do not use it with temperatures below 3ºC or above 45ºC.
Never put the timer to be charged to the wall by the USB connection while
the system is in use with water. Remove the unit from any water source and
dry it before charging it.