AVLink HE-A2RS Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Extender AVLink HE-A2RS herunter. AVLink HE-A2RS 6 Seiten. Daisy chain hdmi extender system

Seite drucken
Installation  
1.  Turn  OFF  the  Video  Source  Device  and  Monitor  
2.  Connect  the  HDMI  cable  between  the  Video  Source  Device  and  the  "HDMI  IN"  port  of  HE-­A1L  (or  HE-­A8L)  
3.  Connect  the  HDMI  cable  between  the  Monitor  and  the  "HDMI  OUT"  port  of  HE-­A2RS  
4.  Connect  the  power  adaptor  to  the  DC  jack  of  HE-­A1L  to  powered  up  the  unit  
5.  Connect  the  power  adaptor  to  the  DC  jack  of  HE-­A2RS,  to  powered  up  the  unit  
6.  Connect  the  power  adaptor  to  the  DC  jack  of  HE-­A8L  to  powered  up  the  unit  
7.  Connect  the  CAT5/6  cable  between  the  "LINK"  port  of  HE-­A1L  (or  HE-­A8L)  and  the  "LINK"  port  of  HE-­A2RS.  
8.  Turn  ON  the  Video  Source  Device  and  Monitor    
 
Note  
 It's  recommended  to  set  all  Monitors  with  the  same  resolution.  If  not,  please  find  the  lowest  resolution  Monitor  first,  
and  then  "press  and  hold  2  seconds"  the  EDID  COPY  PUSHBUTTON  of  HE-­A2RS  which  connected  to  that  monitor  
for  broadcasting  the  lowest  resolution  to   A LL  of  other  monitors.  
 It's  recommended  to  have  the  STANDARD  1.8M  HDMI  cable  for  the  connection  to  get  the  better  video  quality.  
 When  connecting  the  HE-­A8L  to  the  computer  of  RS-­232  port,  please  use  RS-­232  cable(null  modem  female  to  
female).  
Cascade  Connection  Diagram  
HE-­A1L  /  HE-­A2RS  
 
 
 
 
 
4