AAXA Technologies M1 Standard Benutzerhandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Projektor AAXA Technologies M1 Standard herunter. AAXA Technologies M1 Standard 17 Seiten.
Auch für AAXA Technologies M1 Standard: Benutzerhandbuch (16 seiten), Benutzerhandbuch (18 seiten), Spezifikationen (2 seiten), Spezifikationen (2 seiten)
Seite drucken
General Operation
Connecting to a VGA / Computer input source
The projector can accept a 15-pin RGB input
source from a laptop's external monitor port or
graphics card. This source is connected through
the 15-pin "VGA" port on the back of the
projector.
To connect a VGA cable, plug the VGA cable into
the back of the projector. Then select the "VGA PC" option in the Main Menu. This
will enable the projector to receive VGA signals.
Important: Be sure to setup the computer to enable video signal output. If using
the M1 as an external monitor on Windows based systems, this can be done by
selecting "extend my desktop to this monitor. " Note: Each computer system is
di erent – please check with your owner's manual for how to properly output video
signals. Some Apple computers may require a DVI to VGA adapter.
Accepted Display Resolutions:
Connecting an Audio/Video input source - The projector can accept di erent A/V
(Audio/Video) sources through the A/V port. These sources are connected through
a 3.5mm A/V cable.
Max Supported Resolutions:
800x600 (native / optimal)
1024x720
1280x800
NTSC: 720x480
PAL: 720x576
08