AVLink BNC90 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kopfhörer AVLink BNC90 herunter. AVLink BNC90 9 Seiten. Active noise cancelling bluetooth headphone

Seite drucken

1. Turn two headphones to be in the paring mode together (by press and hold the

MFB until the indicator flashes yellow) and these two headphones will complete

the pairing process automatically. After the pairing process is completed, the

indicator of the secondary headphone will light up green automatically; while the

primary headphone continuously flash red and green alternatively and waits to

be paired with the portable device.

2. Activate the Bluetooth of the portable device and select " " from the list found. If

the pairing process is completed, the LED indicator of both headphones keep in

regular green 1 second then flash green 3 times every 3 second. This signal that

the headphones enter into standby modes.

Using ShareMe

Every time you will have to complete the ShareMe paring before using both

headphones to provide same music or audio programs at the same time.

When the secondary headphone is turned off which both headphones are in use, the

primary headphone will not be affected and can be in use continuously. If the

primary headphone is turned off first and the secondary headphone is still expected

to be in use, the indicator of the secondary headphone will return to standby mode

and flash green 1 once every second. You will have to manually pair the headphone

with a device. This is a once process. Afterward, the user only needs to tap the MFB

of the secondary headphone to reconnect with the device.

ShareMe button control

Call operation

1. To answer an incoming call, tap the MFB once;

2. During the call, press and hold the MFB to

3. When an incoming call from the third party

4. When Bluetooth is connected, press and hold

Play /pause

Tap the MFB once

Volume

Adjust the volume wheel until

control

Previous /

While the music is playing, tap forward button

next tracking

once to next track; To move to the previous

tap the "MFB" again to hang up. Press and

hold the MFB for 2 seconds to reject the

incoming calls.

hang up for 2 seconds to seamlessly switch the

conversation between the headphone and the

mobile phone.

occurs during the call, tap the MFB to hang up

the current call and to answer the third party's

incoming call; Or press and hold the MFB to

put the call on hold and to answer the third

party's incoming call.

the MFB for 2 seconds to retrieve the last

dialed number

Only work for

the primary

headphone

Both

headphones

can control

simultaneously