Aqua Creek Revolution Deep F-702RLNA-DD-G Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für Hebesysteme Aqua Creek Revolution Deep F-702RLNA-DD-G herunter. Aqua Creek Revolution Deep F-702RLNA-DD-G 14 Seiten. Draft lift

Seite drucken

Revolution Deep Draft Assembly Instructions

STEP 2: INSTALL LIFTING ARM

Locate the LIFTING ARM and the following hardware:

• (1) 1/2" x 2-3/4" SHOULDER BOLT

• (1) 3/8" x 2" SHOULDER BOLT

• (1) 5/16" FLAT WASHER

• (1) 5/16" NYLOCK NUT

• (1) 3/8" FLAT WASHER

• (1) 3/8" NYLOCK NUT

Remove the shipping strap and all packing from

the LINEAR ACTUATOR. Connect the LIFTING ARM

between the MAST and the LINEAR ACTUATOR as

shown in the ﬁ gure below. Make sure the end marked

"B" attaches to the mast. Tighten NYLOCK NUTS (2)

until snug as shown in PHOTO 2.

DO NOT OVERTIGHTEN!

3/8" FLAT

WASHER

3/8" NYLOCK

NUT

1/2" X 2 3/4"

SHOULDER BOLT

5/16" NYLOCK NUT

5/16" FLAT WASHER

ACTUATOR

STEP 2

STEP 3: INSTALL CONTROL ARM

Locate the CONTROL ARM and the following

hardware:

• (1) 1/2" x 2-3/4" SHOULDER BOLT

• (1) 3/8" FLAT WASHER

• (1) 3/8" NYLOCK NUT

Install the CONTROL ARM (end marked "A") onto

the MAST as shown in the ﬁ gure below. Tighten the

NYLOCK NUT until snug as shown in PHOTO 3. DO

NOT OVERTIGHTEN!

3/8" FLAT WASHER

3/8" NYLOCK NUT

3/8" X 2"

SHOULDER

BOLT

LIFTING

ARM

1/2" X 2 3/4"

SHOULDER BOLT

CONTROL

ARM

STEP 3

Revised 6/25/20