AVM inspiration C6m Betriebsanleitung - Seite 11
Blättern Sie online oder laden Sie pdf Betriebsanleitung für CD-Spieler AVM inspiration C6m herunter. AVM inspiration C6m 16 Seiten.
Seite drucken3.6 CD player
The basic functions uf the CD player can be accessed by the buttons right under the display (4 – 8). For
more sophisticated functions see chapter 4.1 to 4.3
3.6.1 Open / close
To open the tray press the most right button (8) under the display (3). Closing is done by pressing this button
again or slightly pushing the tray (9). After the tray has closed the player reads the directory of the inserted
disc. The display shows the actual title / total number of titles, the player status (PLAY / STOP / PAUSE) and
the actual playing time. If no disc is inserted it will show "no disc".
TIP: Using the buttons
button
(7) will close the tray and the player starts playing the selected title.
3.6.2 Basic functions (SKIP / SEARCH, PLAY, PAUSE, STOP)
While the player is stopped the buttons
previous title. Holding the button down scans automatically up / down. The number of the actual title is
shown in the display.
Pressing
(7) starts the player. While playing the button changes it's function to
When the player is playing a short tip on the buttons
down the buttons starts the rewind / fast forward function. Rewind / fast forward stops automatically when the
begin / end of the actual title is reached.
While the player is playing the most right button (8) under the display shows the STOP-symbol. When the
player is stopped this button changes it's function to OPEN / CLOSE.
3.6.3 Programming an individual playlist
If a disc is inside the player You can program Your individual playing sequence as follows: Hold the button
MENU (6) down for more than 2 seconds to enter the playlist-menu. Pressing the buttons
allows You to select the position in the playlist. The display shows above these buttons the actual playlist-
position / total number of programmed titles (POS = x/xx) and the total programmed playing time (SUM =
xx:xx). The buttons
buttons the track number (TRCK = x) and below the playing time of the selected title(LEN = xx:xx).
EXAMPLE:
The CD inside the player contains 15 titles. You want to play only titles 7, 3 and 8.
•
Press MENU (6) for more than 2 seconds. The display now shows "POS 1/1". In this moment the
position cannot be changed, because nothing is yet programmed.
•
Select title 7 using the buttons
•
Select position 2 using the buttons
•
Select title 3 using the buttons
•
Select position 3 using the buttons
•
Select title 8 using the buttons
•
Now press EXIT (6) to finish the programming.
The programmed sequence is stored until You open the tray and insert a new CD. Before playing You can
choose if You whish to play the programmed sequence or the CD as it is (see chapter 4.1).
You can also change the programmed sequence later on by pressing the MENU button (6) for more than 2
seconds. After entering the program-menu select the position to be changed using the buttons
5) and the new title using the buttons
shows "--" and You can remove the position completely by pressing the button DEL (4). When the desired
changes have been made press EXIT (6).
or
(4, 5) You can select a certain title before closing the tray. A short tip on the
TRK
(7, 8) select the title which is to be played. The display shows above these
TRK
(7, 8). Display shows "TRK = 7"
POS
TRK
(7, 8). Display shows "TRK = 3"
POS
TRK
(7, 8). Display shows "TRK = 8"
TRK
or
(4, 5) select the title. A short tip switches to the next /
or
(4, 5) selects the previous / next title. Holding
(4, 5) "POS = 2/2"
(4, 5) "POS = 3/3"
(7, 8). When the track number below 1 is selected the display
11
(pause).
POS
(4, 5)
POS
(4,