AVM Fritz!Box Fon WLAN 7270 Installation, Konfiguration und Betrieb - Seite 19
Blättern Sie online oder laden Sie pdf Installation, Konfiguration und Betrieb für Modem AVM Fritz!Box Fon WLAN 7270 herunter. AVM Fritz!Box Fon WLAN 7270 20 Seiten.
Seite drucken
Connecting More Computers to the LAN Ports
Connecting
FRITZ!Box Fon WLAN 7270
Set aside the network cable (yellow) from the FRITZ!Box
package.
1.
Switch on your computer.
2.
If you work with a Linux operating system, use YaST
to configure your network card with the setting
"DHCP", if this setting is not already configured.
Insert one end of the LAN cable to the computer's
network adapter.
3.
Connect the other end of the LAN cable to a socket on
the FRITZ!Box labeled "LAN 1", "LAN 2", "LAN 3" or
"LAN 4".
Now the FRITZ!Box and computer are connected to each
other.
Connecting More Computers to the LAN Ports
Additional cables are required to connect further comput-
ers. In purchasing a LAN cable, note the instructions in the
section "Cables and Buttons" on page 126.
You can connect a computer to any of the four LAN ports of
the FRITZ!Box at any time.
Connecting a Network Hub or Switch
You can connect a network hub or switch to one of the LAN
ports on the FRITZ!Box if you would like to connect multi-
ple computers via LAN.
19