Dexter Laundry WCAD Series Programmieranleitung Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Programmieranleitung Handbuch für Waschmaschine/Trockner Dexter Laundry WCAD Series herunter. Dexter Laundry WCAD Series 6 Seiten. Vended washers
Seite drucken
Coin Washer Cycle Parameter Ranges
The range of each cycle parameter is shown below:
0 to 15 minutes for Prewash, Rinse1 and Rinse 3 to 15 minutes for Wash and Final Rinse.
For the baths that can, if the time is set to zero, then that bath will be eliminated from the
cycle.
HH – hot, CH – warm, CC – cold, EE – no water. The owner can set the bath default.
For the wash bath, the default is over ridden for that cycle by the customer when the
temperature is selected.
LO – low The owner can change the displayed value, but for a coinwasher only LO will be
put into the cycle.
The selections are "d" for delay the bath time until water level is reached or "t" for
decrement bath time during the fi ll.
0 to 10 minutes for Prewash, Wash, Rinse1 and Rinse2 1 to 10 minutes for Final Spin.
The owner can change the displayed value, but for a coin washer only 0 will be put into the
cycle.
Bath Cycle Time "ct"
Bath Water Temperature "t"
Bath Water Level "L"
Bath Delay Fill "dF"
Bath Spin Time "S"
Bath "IS"
5
Part # 8533-073-001 11/11