AVM INSPIRATION CS 2.2 Betriebsanleitung - Seite 6

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Auto-Empfänger AVM INSPIRATION CS 2.2 herunter. AVM INSPIRATION CS 2.2 20 Seiten. Compact streaming cd-receiver

Seite drucken

1.8 RC 9 Remote control

The included RC 9 remote control allows for easy and comprehensive control of the CS 2.2. Before you

can use the RC 9 together with your CS 2.2, both components need to be connected. This process is

also referred to as „Pairing". In order to start the pairing process, please follow the instructions as

described in section 4.4.5.

For a detailed description of functions and features of the RC 9 remote control, please refer to chapter

1.8.1 Battery charge

In order to charge the included lithium-ion battery of your RC 9 remote control, please connect the

power supply unit with the USB cable. On the other end, please connect the USB charging cable

optionally with the RC 9 remote control or with the supplied docking station. The charge starts

automatically, as soon as the power supply unit is connected to the power supply system and, if

necessary, the RC 9 remote control is placed in the charging cradle of the docking station.

NOTE: Due to the included motion sensor of the RC 9 remote control, the device may be

unintentioanally activated during transportation. For this reason, the RC 9 is delivered with a fully

discharged battery. In view of a long lifecycle of the lithium-ion battery, we recommend to fully charge

the battery before being used for the first time. Please follow the above mentioned instructions and do

not interrupt the charging procedure until the status bar in the upper right corner of the dispay

indicates a fully charged battery.

Battery is fully charged, remote control is connected to the charger, charging completed

Battery is almost fully charged, remote control is connected to the charger

Battery is empty, remote control is not connected to the charger

1.9

Connecting a recorder

Connect the recorder's output to one of the inputs (19). The inputs of the recorder must be connected

to the fixed level output (25).

1.10 Connecting subwoofers

Aktiver Subwoofer ohne Frequenzweiche

If you use an active subwoofer (with built in power amplifier), simply connect it's inputs to the unit's pre

out (26) and adjust the bass level at the subwoofer.

1.11 Connecting loudspeakers

Connect the speakers to the speaker terminals (28). Use only good speaker cables with sufficient

diameter. Make sure, that the red terminals are connected to the red or "+" terminals of the speakers

and the black terminals to the black or "-" terminals of the speakers.

1.12 Tuner antenna

Connect the antenna cable to the antenna socket (15).