AvMap geosat5 APRS Anweisungen zur Einrichtung - Seite 6
Blättern Sie online oder laden Sie pdf Anweisungen zur Einrichtung für Sende- und Empfangsgerät AvMap geosat5 APRS herunter. AvMap geosat5 APRS 9 Seiten.
Set-up for Kenwood TM-D700 A/E
with the AvMap Geosat 5
1.
Kenwood TM-D700 A/E set-up
NOTE: These instructions assume you have basic familiarity with operation of both the TH-D700 A/E
and the AvMap Geosat 5.
a. While programming the Kenwood TM-D700 and/or the AvMap Geosat 5, the communication cable
should be disconnected. Strange and/or bad things can occur if you fail to head this warning!
b. Starting with the Kenwood TM-D700. Note: Items in [ ] are buttons and { } are items you enter
and/or 'see' on the radio screen.
c. Turn on the radio.
d. Make sure that {T}, {CT} and {DCS} do not appear at the top of your Kenwood TM-D700 screen,
Table 1. Kenwood TM-D700 A/E Settings
Screen #
3-1
3-2
3-3
3-5
3-7
3-B
3-C
3-D
3-J
Item
CALL SIGN
GPS UNIT- NEMA
FORMAT
WAYPOINT
POS AMBIGUITY
POS LIMIT
PACKET PATH
PACKET TRANSMIT
METHOD
PACKET TRANSMIT
INTERVAL
PACKET TRANSFER
RATE
Select/Enter
{your call sign}
{NEMA96}
{9 DIGITS NEMA}
{OFF}
{OFF}
{WIDE1-1,WIDE2-2}
{AUTO}
{3 MIN.} NOTE: Smaller times
(<5min) are for mobile units while
stationary stations will use longer
times (~10 min. and up)
{1200 bps}