Avocent DSR Series DSR1022 Firmware-Versionshinweise - Seite 2

Blättern Sie online oder laden Sie pdf Firmware-Versionshinweise für Schalter Avocent DSR Series DSR1022 herunter. Avocent DSR Series DSR1022 3 Seiten. Avocent dsr series dsr1021: supplementary guide
Auch für Avocent DSR Series DSR1022: Broschüre (2 seiten), Freigabemitteilung (3 seiten), Firmware-Versionshinweise (3 seiten), Firmware-Versionshinweise (3 seiten), Firmware-Versionshinweise (3 seiten), Freigabemitteilung (3 seiten), Freigabemitteilung (1 seiten), Freigabemitteilung (2 seiten), Handbuch zur Schnellinstallation (2 seiten), Freigabemitteilung (2 seiten), Ergänzendes Handbuch (2 seiten)

=============================================================================

This release contains the following enhancements:

1. Updated DSAVIQ-USB2 and DSAVIQ-PS2M module firmware to revise DDC string to insure

greater compatibility with local port monitors.

2. Added support for IPv6 from either the On-Board Web Interface (OBWI) or DSView® 3

management software version 3.5.1.88 or higher. Note: ICMP ping response cannot be disabled

while in IPv6 mode.

3. Added support for Avocent Mouse Synchronization, which eliminates the need to disable mouse

acceleration on Windows® and Macintosh® target devices connected via a DSAVIQ-USB2

module. Note: This appliance firmware will cause DSAVIQ-USB2 modules to automatically

update.

4. Added the capability to configure network settings via the OSCAR® graphical user interface.

5. Added support for DSR switch-based LDAP user authentication via the OBWI, DSR Remote

Operations Software, and the OSCAR interface.

6. Added support for virtual media via the OBWI.

7. Added support for the HP AF605A module for seamless access to HP® c-Class blade servers.

8. Added the ability to enable or disable SNMP via the OBWI.

9. The OSCAR interface displays four-digit version numbers by default.

10. Updating the network configuration no longer requires the DSR switch to reboot for the changes to

become active.

=============================================================================

This release contains the following fixes:

1. Corrected issue where IQ module name was editable by a user via the OBWI.

2. Corrected issue where the KVM video viewer would blink when set to full-screen mode and

connected to a 1280x1024 resolution target device.

3. Corrected issue where an appliance administrator received an insufficient access rights error

when using the local port to access a target device on a cascaded switch.

4. Corrected issue where the DSAVIQ-USB2 module's mouse was not detected by the LSI RAID

card's WebBIOS.

5. Fixed a security vulnerability in the GoAhead Webserver Directory Management Policy.

Enhancements

Fixes