Avocent DSR Series DSR4030 Handbuch zur Schnellinstallation - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Schalter Avocent DSR Series DSR4030 herunter. Avocent DSR Series DSR4030 8 Seiten. Kvm over ip switches
Auch für Avocent DSR Series DSR4030: Hardware-Spezifikationen (2 seiten), Freigabemitteilung (3 seiten), Firmware-Versionshinweise (3 seiten), Firmware-Versionshinweise (3 seiten), Firmware-Versionshinweise (3 seiten), Freigabemitteilung (3 seiten), Spezifikationen (2 seiten), Broschüre (2 seiten), Broschüre (3 seiten)

Seite drucken
Avocent DSR Series DSR4030 Handbuch zur Schnellinstallation
The following instructions will help you
to connect your DSR switch.
Should you require further assistance, please
consult your installer/user guide.
Connecting the SPC device to the
DSR switch (optional)
Plug one end of the cable supplied with the SPC
power control device into the SPC port on the DSR
switch and plug the other end into the SPC device.
Plug the power cords from the target servers into the
SPC power outlets. Plug the SPC device into an
appropriate AC wall outlet.
Powering up targets and switch
Power up each target server and then power up the
DSR switch.
Connecting local virtual media
(optional)
Connect virtual media devices to any of the five USB
ports on the DSR switch.
NOTE: To open a virtual media session with a
server, the server must first be connected to the
switch using a virtual-media capable DSRIQ
module (USB2 or USB2L).
For additional information
For further instructions on DSR switch connection,
software setup and security configuration, please
refer to the installer/user guide included with the
switch. Check http://register.avocent.com for the
latest DSR switch software and firmware updates.
Check our web site at www.avocent.com/support to search the knowledge base or use the online request.
Avocent, the Avocent logo, The Power of Being There and DSR are registered trademarks of Avocent Corporation. All other marks are the property of their respective owners. © 2005 Avocent Corporation. All rights reserved.
Quick Installation Guide
DSR
®
Switch
DSR1030 | DSR2030 | DSR4030 | DSR8030 Switches
To connect a DSR switch
(continued from reverse side)
A1
SPC Power
Control Device
The Power of Being There
or
DSR Switch
1
3
5
7
9
11
2
4
6
8
10
12
Connect your
SPC device to
the target servers
(optional).
Server
Server
Server
Server
External Virtual
Media Device
Plug in virtual media
13
15
14
16
devices to the USB
ports (optional).
Power up target
servers and then
the DSR switch.