Avocent ACS 6000 Anmerkungen zur Veröffentlichung - Seite 2

Blättern Sie online oder laden Sie pdf Anmerkungen zur Veröffentlichung für Server Avocent ACS 6000 herunter. Avocent ACS 6000 5 Seiten. Advanced console server
Auch für Avocent ACS 6000: Anmerkungen zur Veröffentlichung (4 seiten), Handbuch zur Schnellinstallation (20 seiten), Anmerkungen zur Veröffentlichung (5 seiten)

Major features of the ACS 6000 console server version 2.4.0 include:

1. ACS 6000 uses an embedded FIPS 140-2-validated cryptographic module (Certificate #1051)

running on a Linux® Power PPC platform per FIPS 140-2 Implementation Guidance section

G.5 guidelines.

Customer can enable or disable the FIPS Module via OBWI or CLI. Every update the

appliance will reboot and the SSH keys will be re-generated.

The following applications will be in FIPS mode of operation when FIPS module is

enabled: HTTPS, SSHv2, SNMPv3 and ADSAP2.

The time period to boot of the appliance will be longer when the FIPS Module is

enabled because of the power-up self test (it takes almost 10 min).

The time period to establish an SSH session will be longer when the FIPS Module is

enabled because of the verification of the integrity of the cryptographic module.

2. Web User Interface usability enhancements:

My Computer: new option to transfer file from/to the appliance to/from the computer

where the browser is running. The option is available for the following operations:

"Save Configuration", "Restore Configuration", "Upgrade Firmware" and "Power

Management – Upgrade Firmware".

Make sure the browser allows store file in the computer for "Save Configuration".

3. Event Notifications: new events when FIPS module is enabled:

o Event 16 – FIPS compatible OpenSSL self test failed

o Event 17 – Service in FIPS mode

o Event 18 – Service in non-FIPS mode

4. Login Banner support.

o Administrator can enable and configure the login banner via OBWI and CLI.

o The login banner is supported by the following sessions: Telnet, SSHv2, OBWI and

console.

5. Group authorization has new attribute: session idle timeout. If the group authorization that the

user belongs to does not have the session idle timeout configured, the appliance session idle

timeout will be applied for the session. (Available in patch release v 2.2.0-19)

6. Support configuration via bootp request. The Bootp Configuration Retrieval option allows the

entire unit configuration to be retrieved over Bootp/TFTP during boot and during DHCP

renewal. There are two ways to push a configuration during a DHCP request/renewal. The

configuration can be sent as file created by the Save Configuration appliance system tool, or it

can be sent as a CLI script to be executed under the command line scripting interface.

(Available in patch release v 2.2.0-19)

7. Feature Alert Strings supports regular expression in the configuration of the string. (Available

in patch release v 2.2.0-19)

8. Multiple Routing Tables feature is supported. This feature allows customer to configure

different networks by built-in Ethernet interface (ETH0 and ETH1) and to have one default

gateway for each interface. This feature works only for IPv4 network and requires static

configuration of the IP address in both interfaces. (Available in patch release v 2.2.0-19)