Aqua Lung 63093 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Tauchinstrument Aqua Lung 63093 herunter. Aqua Lung 63093 8 Seiten. Slt neck & wrist seal

MAINTENANCE & STORAGE

• Remove the Oval Stiff Ring regularly to rinse the cuff seal and/or glove from salt or debris.

• Remove the Oval Stiff Ring if the drysuit shall be stored for prolonged periods. Doing this

will decrease stress on the PU-Ring. Long periods of stress on the PU-Ring might result in

leakage or other damage to the system.

• Avoid exposing the PU-Ring to heat or sunlight. Subjecting the assembled unit to

prolonged heat or sunlight with an inserted cuff seal is not recommended. The PU-material

may expand, which could cause leakage.

IMPORTANT INFORMATION

• A cuff seal provides the seal for the system and must be used at all times, even when the

assembly is used in combination with a dry glove system.

• A minimum seal thickness of 0.8mm is recommended. Use of a thinner seal may cause

leakage.

• Test the strength and seal integrity before diving.

A NOTE REGARDING SILICONE SEALS

• Even though silicone seals are better in many ways than regular latex seals, they still must

be handled with care.

• Even if silicone seals have more stretch than latex seals, do not stretch the seal more than

required. Assist yourself with a free hand when pulling the seals over your head or hands,

both for the seal and your comfort. Use a product such as talcum, on a regular basis, to

minimize frictional strain on the seal and for personal comfort.

• Avoid contact with sharp objects like finger nails or rings when handling seals.

• When trimming seals, use sharp scissors. Cut edges should be as smooth and straight as

possible. Do not trim across trim lines.

ENGLISH