AVOCOR AVF-6550 Schnellstart-Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Monitor AVOCOR AVF-6550 herunter. AVOCOR AVF-6550 20 Seiten.

AVOCOR AVF-6550 Schnellstart-Handbuch
Switching the Avocor display on and off
Switching on
1. Plug the end of the supplied power cord into side of the display
2. Connect the other end to the power source.
3. Turn on the main power switch on the underside of the display. The power LED indicator
lights Red in the middle of the display will indicate that the display is in "standby" mode.
4. Press the Power button and the power LED indicator in the middle of the of the display
will then light up in green, which tells you that the screen is switched on.
5. After a brief warm-up period, an image will be displayed.
Switching off
1. Switch the display off by pressing the Power button on the display.
2. The display will then cycle and shut down.
Selecting the Source
You can access a number of sources on the Avocor AVF displays including, HDMI,
DisplayPort, VGA & OPS.
The Source button is located on the Connect & Control Bar or on the Remote Control.
Once the menu has been selected, you will see the option to select the source you
require.
HDMI 1, HDMI 2, HDMI 3, HDMI 4, WPS, DisplayPort, VGA, & OPS
If there is no active signal from the chosen source, the screen will display the following
message: "No Signal".
Connecting the Display
Proceed as follows to connect the display to your video sources, external controller.
When connecting your equipment:
1. Turn off all equipment before making any connections.
2. Use the correct signal cables for each source.
3. For best performance and to minimise cable clutter, use high-quality cables that are only
as long as necessary to connect two devices. (Don't use a cable longer than 5 metres).
4. Ensure that the cables are securely connected.
v.30_05_2018
10