CP EBDHS-DD-LT30 Produkthandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Produkthandbuch für Sicherheitssensoren CP EBDHS-DD-LT30 herunter. CP EBDHS-DD-LT30 13 Seiten. Ceiling pir hs presence detector–dali/dsi, low temperature

Seite drucken

Technical data

Dimensions
Weight
Supply Voltage
Frequency
Circuit protection
Maximum Load
Power consumption
Dimming output
Terminal Capacity
Temperature
Humidity
Material (casing)
Type
IP rating
Compliance

Part numbers

Part number
Complete detector EBDHS-DD-LT30
Accessories
DBB
UHS5
UNLCDHS
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in
accordance with the latest edition of the IEE Wiring
Regulations and any applicable Building Regulations.
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.
12
See diagrams opposite
0.2kg complete unit
230VAC +/- 10%
50Hz
10A
Channel 1 (switching):
10A of lighting and/or ventilation
including incandescent, fluorescent,
compact fluorescent, low voltage (by
switching the primary of transformer).
Channel 2 (dimming):
Maximum number of DSI or DALI
ballasts is 10 unless the relay is
disabled then it is 20.
On 800mW, Off 299mW
Basic insulation only. Although low
voltage, this is not an SELV output
and should be treated as if mains
potential. Use mains rated wiring.
2
2.5mm
-30ºC to 35ºC
5 to 95% non-condensing
Flame retardant ABS and PC/ABS
Class 2
40 without gasket. 65 with gasket.
EMC-2004/108/EC
LVD-2006/95/EC
Description
HS PIR presence detector DD DALI/DSI low temperature
Surface mounting box
Programming IR handset
Universal LCD IR handset
EBDHS-DD-LT30
DBB
UK and international patents applied for
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel:
+ 44 (0) 333 900 0671
Fax:
+ 44 (0) 333 900 0674
www.cpelectronics.co.uk
Ref: #WD732 Issue 2