aqua metro Contoil DFM 12ECO Montage- und Betriebsanleitung - Seite 8

Blättern Sie online oder laden Sie pdf Montage- und Betriebsanleitung für Datenlogger aqua metro Contoil DFM 12ECO herunter. aqua metro Contoil DFM 12ECO 20 Seiten.

Seite drucken

Safety instructions

Designed use

This unit is designed for acquisition, calculation, displaying and sending datas. Incorrect use or use other than that designated, can com-

primise the operational safety on device. The manufacturer accepts no liability for damages being produced from this.

Installation, commissioning and operation

Installation, connection to the electricity supply, commissioning and maintenance of the device must be carried out by trained, qualified spe-

cialists authorised to perform such work. The specialist must have read and understood these Operating Instructions and must follow the

instructions they contain. The installer must ensure that the measuring system is correctly wired in accordance with the wiring diagrams.

Before working on the electrical installation, make sure to disconnect the power supply and ensure that nobody can reconnect it without

your permission.

Pay attention to the following points:

• Voltage, operation data

• Maximum transmission length

• Cable cross section, length

• Ambient temperature and mounting position

Operational safety

The manufacturer reserves the right to modify technical data without prior notice. Your local distributor will supply you with current infor-

mation and updates to these Operating Instructions.

Return of the instruments

The following procedures must be carried out before a device requiring repair or calibration, for example, is returned to Aquametro:

• Always enclose a fully completed "Repair Form" with the device. Only then can Aquametro transport, examine and repair a returned

device.

Notes on safety conventions and icons

The devices are designed to meet state-of-the-art safety requirements. They have been tested and left the factory in a condition in which

they are safe to operate. They can, however, be a source of danger if used incorrectly or other than as designated use. Consequently,

always pay particular attention to the safety instructions indicated in these instructions by the following symbols:

Warning!

"Warning" indicates an action or procedure which, if not performed correctly, can result in injury or a safety hazard.

Comply strictly with the instructions and proceed with care.

Caution!

"Caution" indicates an action or procedure which, if not performed correctly, can result in incorrect operation or damage

to the device. Comply strictly with the instructions.

Note!

"Note" indicates an action or procedure which, if not performed correctly, can have an indirect effect on operation or

trigger an unexpected response on the part of the device.

CONTOIL

DFM 12ECO