Avonic AV-CON300 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Controller Avonic AV-CON300 herunter. Avonic AV-CON300 13 Seiten. Ptz camera controller
Auch für Avonic AV-CON300: Benutzerhandbuch (16 seiten), Schnellstart-Handbuch (2 seiten)

Seite drucken

Up to 10 preset positions can be set per camera. The number of preset positions for each camera is

from 1 to 10.

5. Call preset

When the "PRESET" and "RESET" function are in the closed state, select the "POSITION" area number

key (1-10) to enter the preset number 1, that is, the completion of the number 1 preset call,

keyboard display:

6. Delete preset

Press "RESET" button (delete the preset "RESET" button will remain in a state of light), keyboard

display:

Select the "POSITION" area number key (1-10) to enter the preset number 1, that is, the completion

of the number 1 preset deletion, keyboard display:

7. Exposure mode selection

Press "AE AUTO" button to trigger auto exposure mode;

Rotate the "BRIGHT" knob that triggers the brightness priority, which can adjust the brightness of the

camera, "+" to increase the brightness, "-" to reduce the brightness;

Rotate the "IRIS" knob that triggers the aperture priority, which can adjust the aperture of the

camera, "+", and "-" to reduce the aperture;

8. White balance mode selection

Press the "WBC MODE" button to cycle the white balance modes ("WBC AUTO", "INDOOR",

"OUTDOOR", "ONE PUSH", "ATW", "OUT", "MANUAL");

Rotate the "R" knob that triggers the manual white balance mode, which can adjust the depth of the

red, "+" the red becomes darker, and the "red" becomes lighter;

Rotate the "B" knob that triggers the manual white balance mode, which can adjust the depth of the

blue, "+" the blue becomes darker, and the "blue" becomes lighter;

9. The camera menu call

Press the "CAMERA OSD" button to call the camera menu. Use the rocker switch up and down the

project, the left and right confirmation, Exit menu can be saved.

10. Camera tilt, zoom lens adjustment

Rotate the "PTZ/ZOOM SPEED" knob to adjust the joystick to control the camera pan tilt speed and

the "ZOOM" button to control the camera zoom speed. According to the point on the keyboard logo,

small point direction of slow speed, the speed of the speed of large dots.

11. "ZOOM" button to use

Press "ZOOM" button "TELE" to control the lens focal length.

Press the "ZOOM" button "WIDE" to control the short focal length of the lens.

Use the "PTZ/ZOOM SPEED" knob to control zoom speed.

This function is the same as the rocker knob function, but it can adjust the zoom speed