Billi OmniOne Pro Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sanitärprodukt Billi OmniOne Pro herunter. Billi OmniOne Pro 9 Seiten. Dispenser options: xl and mixer tap, al
Auch für Billi OmniOne Pro: Installationshandbuch (7 seiten)

Seite drucken

WARNINGS

WARNING:

NOTE: This appliance requires the use of CO

stored in a pressurised cylinder for correct operation.

For more information about CO

, please refer to the Material Safety Data Sheet included with the CO

Installation of this device by Billi service technicians is recommended and is available by contacting Billi directly via telephone

or website below:

Web:

www.billi.com.au

Phone:

1800 812 321

DISPOSAL

Superseded equipment holds residual recovery value and forms part of Billi's Global Greentag certified cradle to cradle philosophy.

An environmentally friendly method of disposal will ensure that valuable raw materials can be recovered and used again.

The CO

cylinder requires special disposal procedures. Up to date information for disposal can be obtained from your local council office.

cylinder.

Features

Multi-Function Touch Display

Your Billi OmniOne incorporates a multi-function touch display for ease of setup and use.

The display will automatically go into a sleep mode after a period of non-use. To wake simply touch anywhere on the display.

Display Lock

This feature automatically locks the display after a period of non-use, preventing settings from being changed by unauthorised persons.

The Home Screen remains visible when locked, however no screen input functions will operate.

To unlock touch anywhere on the Home Screen to go to the Billi Landing Screen, then press the hidden button on the top right corner of the

Billi Landing Screen.

This feature can be switched on upon request.

Safety Timeout

Your Billi OmniOne incorporates a Safety Timeout to prevent uncontrolled delivery of water.

Water delivery is stopped automatically after a set time interval and can be restarted by releasing then re-pressing the dispenser lever

or button.

Default timeout periods as below:

Hot water: 20 seconds

Chilled water: 60 seconds

Sparkling water: 15 seconds

Childproof Safety Lock

Your Billi OmniOne is fitted with a childproof safety lock to protect against accidental dispensing of boiling water and the risk of burns.

When switched on, dispense boiling water by momentarily pressing the lock button then pressing the boiling lever or button. The safety lock

will automatically re-activate after a period of non-use.

This feature can also be set to permanently on upon request. Refer to page 11 to setup.

Water Delivery Temperatures

Boiling, chilled and sparkling water temperatures can be adjusted to suit individual preferences.

When large quantities of boiling water are dispensed, your OmniOne may require a short period of time to recharge. When this occurs,

boiling water dispense will temporarily be blocked until sufficiently recharged.

Default temperatures as below:

Temperature ranges as below:

Boiling water: 97°C

Boiling water: 60°C - 98°C

Chilled and sparkling water: 6°C

Chilled and sparkling water: 4°C – 20°C

Maximum Boiling Water Temperature

Your Billi OmniOne incorporates a safety feature that limits the maximum boiling water temperature to protect against burns when installed

in high-risk environments.

When switched on, the maximum boiling water temperature is set to 70°C by default, and can be adjusted between the range of 60°C

and 75°C.

This feature can be easily toggled on and off, and can also be set to permanently on upon request. Refer to page 11 to setup.

Tea and Coffee Setpoints

Your Billi OmniOne comes with tea and coffee presets to allow for simple adjustment of boiling water temperature to best suit your

usage preferences.

When tea or coffee is selected, the set boiling water temperature is automatically adjusted to the preset. Boiling water is set to the following

temperatures by default when selected:

Tea: 85°C

Coffee: 92°C

If desired, both presets can be adjusted between a range of 70°C - 98°C to best suit your preferences. Refer to page 11 to setup.