CP Electronics DD-LCDHS Produkthandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Produkthandbuch für Kontrollsysteme CP Electronics DD-LCDHS herunter. CP Electronics DD-LCDHS 8 Seiten.

Seite drucken

IR cmd

Sw lev on

Switch level on

Lux level setting to prevent the luminaires being switched on if the ambient light

level is sufficient (adjustable between 101 and 199).

Use to provide finer adjustment than parameters opposite.

Sw lev off

Switch level off

Lux level setting to switch the luminaires off during occupancy if the ambient light

level goes above the setting (adjustable between 101 and 199).

Use to provide finer adjustment than parameters opposite.

DALI on

Provides a permanent voltage to DALI ballasts when DALI has not been imple-

mented correctly in the ballast. Maximum number of ballasts is 10 unless the relay

is disabled then it is 20.

IR cmd

Lux up

Increase light level. Reverts when occupancy cycle complete.

Lux down

Decrease light level. Reverts when occupancy cycle complete.

Scene up

Steps up between 6 pre-defined scenes.

Scene down

Steps down between 6 pre-defined scenes.

Scene #

Select the individual scene, between 0 and 6. (1 = min. output; 2 = 10%; 3 = 25%; 4 = 50%; 5 = 75%; 6 =

100%)

Override on

Permanently overrides the luminaire output on.

Override off

Permanently overrides the luminaire output off.

Cancel

Cancels the on or off override, returning the detector to normal operation.

Set

If sent before using lux up or lux down, it will set the light level as in „ Light lev‟ found „Ch2 (dim) set‟

7. Ch2 (dim) set Menu (con)

Description

Special Menu

Default

Products

None

-DD & MWS7

only

None

-DD & MWS7

only

Off

-DD & MWS7

only

8. User Menu

Products

All

-DD & MWS7

only

-DD & MWS7

only

-DD & MWS7

only

All