CP Electronics AR-SG-4SM-W Produkthandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Produkthandbuch für Controller CP Electronics AR-SG-4SM-W herunter. CP Electronics AR-SG-4SM-W 13 Seiten. The ar-sg-4sm-w is a stylish push-button wall plate that provides control of an an-10 system.

Seite drucken

Programming via USB and the An-10 commissioning software



Install the An-10 commissioning software. This is available form the CP website (www.cpelectronics.co.uk).



Connect the PC to the Scene Plate using a USB Type A Male to USB Type Micro-B Male cable.



Run the An-10 commissioning software. PC will communicate with the device via USB port.



The PC will create a USB serial port.



Serial port settings are:



Baud rate: 19200



Data Bits: 8



Parity: None



Stop Bits: 1



Flow control: None



An-10 commissioning software detect and sets the USB serial port.



The software can program the scene plate and its channel parameters by selecting 'Configure Scene plate' from

'Tools' drop down menu.



The tool selection will start a configuration dialogue.



The user need to select the active COM from a drop down port list.



The device or channel table can be selected by clicking the table column header.



The dialogue can read back device or channel parameter values by clicking the 'Read' button.



Having read the values, any parameter value can be changed and written back to the device by clicking the 'Write'

button.



Please note that the whole selected column or table will be written back including any changes.