Billi B-4000 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Water System Billi B-4000 herunter. Billi B-4000 13 Seiten. Instant boiling and ambient filtered water system
Auch für Billi B-4000: Installationshandbuch (8 seiten)

Seite drucken

User guide

B–4000.

for a period of up to 10 seconds from the last

dispense. During this mode, the red hot cup

icon is on, and then gives 2 rapid flashes every

2 seconds. To activate, refer to Options, page 8.

—Standby mode

Standby operation may be optionally enabled

to reduce power consumption. In standby

mode the hot water set point is reduced to

72°C . When enabled, standby is invoked after

two hours from the time of last use. When a

tap is pressed in standby no water

is dispensed. The indicators will flash to

indicate the water is not ready. The tap

can be repressed to dispense water.

To activate, refer to Options, page 8.

—Boiling water disabled mode

Your Billi B–4000 features an additional

boiling water safety isolation feature. Once

activated, delivery of boiling water becomes

totally disabled. Ambient water can be

dispensed normally. During this mode,

the hot cup icon will remain off. To activate,

refer to Options, page 8.

—Holiday mode

Holiday Mode is provided to save energy

when the unit will not be used for long periods.

In this mode the water heater is disabled and

the unit will use very little power. Pressing

the Pressure Relief button places the unit in

Holiday Mode.

The unit will exit Holiday Mode if either the

power is turned off then on or if any of the

taps are pressed. Holiday mode

is indicated by an occasional blink (on) of the

red and blue tap indicators.