AvonSynth Quad VC Glide Benutzerhandbuch
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Aufnahmegeräte AvonSynth Quad VC Glide herunter. AvonSynth Quad VC Glide 3 Seiten.
Seite drucken
The
User Guide
Thank you for purchasing from AvonSynth
Congratulations on your purchase of a brand new AvonSynth AVS-Glide-1
Quad VC Glide Eurorack Module. We trust that it will both serve and
inspire you as you create beautiful music with it for years to come.
In order to get the most out of your module, please ensure that you read
this User Guide in its entirety so that you fully understand all of its
functionality, and that you follow all necessary safety directions during use.
Included in the Box
1 x Quad VC Glide Module 1 x 10 pin to 16 pin
Installation
Step 1: Power your system off. Place the module in your Eurorack-compatible
Step 1: Power your system off. Place the module in your Eurorack-compatible
rack in any convenient position. Affix the module to your rails using the
rack in any convenient position. Affix the module to your rails using the
included mounting screws and nylon washers. Neglecting to use these
included mounting screws and nylon washers. Neglecting to use these
washers may result in unnecessary marking of the unit.
washers may result in unnecessary marking of the unit.
Step 2: Triple check the polarity of the power connector before connecting
Step 2: Triple check the polarity of the power connector before connecting
the power cord to your power supply. Ensure that the -12v line marked on the
the power cord to your power supply. Ensure that the -12v line marked on the
back of the module connects to the same end of the flat-cable that also
back of the module connects to the same end of the flat-cable that also
connects to the -12v line on your power supply. While AvonSynth
connects to the -12v line on your power supply. While AvonSynth
modules use shrouded connectors that make this process safer and more
modules use shrouded connectors that make this process safer and more
reliable, some systems do not conform to this polarity standard, so careful
reliable, some systems do not conform to this polarity standard, so careful
checking is always necessary. Connecting the module with incorrect polarity
checking is always necessary. Connecting the module with incorrect polarity
can result in irreversable damage done to the module which cannot be
can result in irreversable damage done to the module which cannot be
covered by warranty.
covered by warranty.
Step 3: Power up your system and start patching!
Step 3: Power up your system and start patching!
www.AvonSynth.com
flat-cable power cord
AVS-GLIDE-1
Quad
VC Glide
4 x M3 Mounting Screws
4 x Nylon Washers
Page 1 of 3