ABACOM Technologies RX-AUDIO-24-D Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Hauptplatine ABACOM Technologies RX-AUDIO-24-D herunter. ABACOM Technologies RX-AUDIO-24-D 4 Seiten.

Description of Main board components
Name
VOLUME
3.5mm STERO JACK
AUDIO_OUT Dx
AUDIO_OUT Sx
Vdc_GND Supply
TACT_SW
USER_BIT
CT_INU
DIP SW
DIP Switch identification: Transmitter and Receiver
Default: All switches OFF. Please refer to RF module manuals for further details
DIP Switch #
Description
1
OB
2
FORMAT
3
CH-MODE
4
ID0
5
ID1
6
ID2
7
ID3
8
SW0
9
SW1
10
SW2
ABACOM Technologies, Inc.
Description
Stereo headphones amplifier volume control
Stereo headphones amplifier volume output decoupled via 100uF capacitors
Module DAC_R output decoupled via 10uF capacitor
Module DAC_L output decoupled via 10uF capacitor
Supply voltage jack. 7Vdc to 12Vdc, center positive
Pushbutton to change channel. Connected to TACT_SW pin of the receiver module
Pin to output serial data, connected to USER_BIT pin of the receiver module
Pin connected to CT_INU pin of the receiver module
10 Position DIP switch. Each switch is connected to the same named pin on the receiver
module. When the switch is closed (ie ON position), the associated line is pulled low.
Out of Band signal test
Signal Scrambling
Selects Tact channel select mode or DIP switch channel select mode.
Used to configure system ID. Only systems with the same ID will output the
transmitted audio signal. 16 possible combinations,
Channel select relative to DIP switch 3. The setting of DIP switch 3 determine
whether these are active or not. Active when DIP switch 3 is in DIP mode.
383 Bering Ave • Toronto • ON • M8Z 3B1 • Tel +1(416)236-3858 • Fax +1(416)236-8866
www.abacomdirect.com