Billi Quadra Benutzerhandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Küche & Badarmaturen Billi Quadra herunter. Billi Quadra 12 Seiten. Xl, xt, xr tap options
Auch für Billi Quadra: Benutzerhandbuch (13 seiten), Installationshandbuch (8 seiten), Installationshandbuch (7 seiten)
Seite drucken
User guide
Billi Quadra & Quadra Plus.
Quadra Plus
If you have installed a Billi Quadra Plus 5,
Plus 9 or Plus 15, you will enjoy the benefit
of instant hot water from your sink mixer
tap ware . When delivering hot water, the
Quadra Plus draws boiling water from the
internal storage tank, pre-mixing it with
cold water, to deliver hot water up to 50°C .
If the delivery capacity of the system is
exceeded, the hot water will run cold with
bubbling being evident . At this point there is
still extra boiling water available for delivery
from the Quadra dispenser . Recovery is
rapid and additional hot water will be
available after a short period of time .
Service Support
Your Billi Quadra incorporates a fault
detection and diagnosis system . Should a fault
occur, a message will be displayed describing
the fault . Pressing the HELP button will advise
you of any checks that can be performed .
If a service call needs to be logged, note the
message displayed and report this when
booking the call . This will assist the technician
in coming prepared to rectify the problem .
For technical support please call
0800 636-0-636 and speak to one
of Billi's experienced technician's .
To book a service call out request a filter
change or please contact the Billi Service
Centre on 0800 636-0-636 or book online
at www . m erquip.co.nz
For information on our filtration and service
contracts please contact Billi Head Office on
0800 636-0-636 or email us at
Filter cartridges are also
available for purchase online at
www . b illi . c om . a u/Buy-Filters .
10
Warranty
Subject to the warranty exclusions set
out below, if a defect in a new product
supplied by Billi Pty Ltd (ACN 124 066 717) ("Billi")
and purchased by you ("customer")
from a reseller authorised by Billi occurs within 12
months of the date of purchase of
the product as a result of defective materials or
defective manufacture by Billi, and Billi receives a
written claim (containing details
of the product defect together with a receipt from
the reseller of the products showing the date of
purchase of the products, or such other proof of
purchase and the date of purchase as Billi may
accept) within 13 months of the date of purchase,
Billi shall, at its discretion:
a) direct an accredited service provider to
attend the customer's premises (provided
that the premises are located within
Australia) and repair the defect free of
charge; but if the customer's premises
are located more than 25 kilometres
from one of Billi's authorised service
agent's locations then the customer will
be liable for any increased freight costs,
fees, charges or levies Billi may incur as a
result of fulfilling its obligations under this
paragraph a) of this Product Warranty; or
b) direct the customer to return the
product to Billi so that Billi may provide
a replacement product free of charge .
If Billi elects to do this, Billi will also
pay the necessary freight charges, and
the customer will pay for the removal of
the product and the costs of reinstalling
the replacement product .
Any product replaced or repaired under
this Product Warranty will be covered by the
product's remaining warranty period, or three
months, whichever is greater . If the product
or any part thereof is replaced by Billi under
this Product Warranty, all of the right, title and
interest in and to the replaced product or part
shall vest in Billi upon it being replaced .