AVOURY ONE Kurzanleitung - Seite 9
Blättern Sie online oder laden Sie pdf Kurzanleitung für Küchengeräte AVOURY ONE herunter. AVOURY ONE 10 Seiten.
Auch für AVOURY ONE: Benutzerhandbuch (20 seiten), Benutzerhandbuch (20 seiten), Kurzanleitung (3 seiten)
Important: Before putting in a
capsule for cleaning or descaling
the care mode must be activated.
Activate the care mode by pressing
the filling capacity (-) and brewing
time (+) buttons simultaneously
and holding them down for about
3 seconds.
Cleaning (approx. 25 minutes)
The tea machine should be cleaned
when the corresponding LED lights up.
01 Remove the lid foil from the clea-
ning capsule and put it in the capsule
slot. Press the Start-Button as soon
as it lights up continuously and the
"Carry out Cleaning" LED starts to
flash.
02 When the "Empty capsule contai-
ner" LED lights up, empty the capsule
container. After reinserting, the pro-
gramme will continue automatically.
If the "Fill water tank" LED lights up,
refill the water tank.
03 Place a vessel with a volume of at
least 300 ml below the outlet. After
approx. 8 minutes, the cleaning liquid
will be discharged into the vessel.
04 Empty the vessel, the drip tray and
capsule container and reinsert the drip
drawer. Place the vessel under the out-
let again. Now the brewing chamber will
be rinsed. This will be repeated once.
05 After the second rinsing cycle, the
capsule will be ejected. Empty the drip
tray, capsule container and the vessel.
06 The cleaning programme is finished
when the LED goes out and the Start-
Button lights up continuously.
Descaling (approx. 15 minutes)
When the "Carry out Descaling" LED
lights up, the descaling programme
should be started. Important: Remove
the water filter before descaling!
01 Open the capsule compartment
and insert a descaling capsule. As
soon as the "Carry out Descaling" LED
starts flashing and the Start-Button
is lit up, press the Start-Button.
02 When the "Fill water tank" LED
is lit up, empty it and pour 250 ml of
Avoury liquid descaler and 250 ml of
tap water into the water tank.
03 If necessary, empty the drip tray
and the capsule container and place
a collecting vessel with a volume of
at least 300 ml under the outlet.
04 Descaling is carried out in two
250 ml cycles. The first cycle is finis-
hed when the Start-Button is conti-
nuously lit up. Empty the vessel and
place it under the outlet again. Press
the Start-Button to continue the
programme.
05 When the second cycle is finished,
empty the vessel and place it under the
outlet again. Flush the water tank and
fill it with 500 ml of tap water and put
it back in again. Rinsing is carried out
again in 2 cycles of 250 ml each.
06 When rinsing is finished, the de-
scaling capsule is ejected and the "Fill
water tank" LED will illuminate. Fill the
water tank with fresh tap water. The
system will briefly rinse once again.
07 When the programme is finished,
the "Descaling" LED will go out and the
Start-Button will light up continuously.