Aqua One MariSys 240 Handbuch zur Schnelleinrichtung - Seite 2
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Water Filtration Systems Aqua One MariSys 240 herunter. Aqua One MariSys 240 2 Seiten.
Auch für Aqua One MariSys 240: Handbuch (15 seiten)
Seite drucken
7. Place the complete MariSys under the aquarium. Hang the Overflow Box on the back or side of the aquarium.
Measure and cut Hoses to length. Allow a little slack. Place Hose Clamps over the end of the Hoses and connect
them to both the Overflow Box and MariSys and tighten.
Position the Priming Pump next to the Overflow Box and connect the Airline already attached to the Overflow
Box (longer piece) to the Inlet port of the Priming Pump, indicated by the small arrow pointing towards the
pump on the red inlet/outlet port.
Connect the second (shorter piece) of Airline to the outlet indicated by the small arrow pointing away from the
Pump and secure it so it is feeding back into the aquarium.
Position the Protein Skimmer Air Pump Next to or on top of the Filter Box. Connect the blue adapter into the
Air Pump outlet. Slide the other end of the Airline onto the Protein Skimmer Airline Connector.
Attach the Waste Hose to the outlet on the Collection Cup of the Protein Skimmer and feed the other end into
an empty bottle.
8. Ensure the aquarium is full of water.
Fill the Priming Chamber in the back of the Overflow Box with water.
Continue to add water to the Priming Chamber as it will travel down the hose and into the MariSys.
Add water until the level in the MariSys is about 1cm above the Maximum level indicator.
Double check all attachments and connections.
Ensure hands are dry and Plug in all power cords and arrange a "Drip Loop"
Turn power on.
It may take up to 30 seconds for the unit to start.
Once the unit is running check for leaks.
For more detailed setup instructions and maintenance requirements refer to the instruction booklet supplied
with this product.
Drip Loop