DFI EC510-SD Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für Desktop DFI EC510-SD herunter. DFI EC510-SD 10 Seiten. Embedded industrial computers

Installing a SODIMM

Grasp the module by its edges and align the SODIMM's notch with the

socket's key; then insert the SODIMM into the socket at an angle and push it

down until the retaining clips snap into place.

To remove a SODIMM, gently spread the retaining clips at each end of the

SODIMM socket. The SODIMM should pop out of the socket. Lift the SODIMM

away from the socket on the mainboard.

Notes:

The system supports dual-channel conﬁ guration. To enable dual-channel,

populate both SODIMM sockets.

If you plan to install only one SODIMM, install it in the DIMM1 socket (lower

one and farther from the center of the mainboard).

The SODIMM sockets can only accept DDR4 memory modules. Please do not

install other types of memory modules.

The installed SODIMM

DIMM2

DIMM1