AVPro Edge AC-CXWP-MDP-70KIT Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Extender AVPro Edge AC-CXWP-MDP-70KIT herunter. AVPro Edge AC-CXWP-MDP-70KIT 4 Seiten.
Seite drucken
AC-CXWP-MDP-100KIT
When paired with the AC-EX100-UHD-R3 the wall
plates are able to transmit 4K at 70 meters or
1080P at 100 meters. EDID management is avail-
able on this receiver.
AC-CXWP-MDP-70KIT
When paired with the AC-EX70-UHD-R the wall plate is
able to transmit 4K at 40 meters 1080P at 70 meters.
EDID management is not available for this receiver but
is still available on the wall plate.
Installation of the Wall Plate Extenders and connection order:
1)
Mount the wall plate in the mud ring.
2)
Connect category cable between the Wall Plate and the Receiver*
3)
Plug in the power into the Receiver. The Wall Plate Transmitter
will receive power from the receiver through the Cat Cable (POE)**
4)
Plug in a HDMI cable from the receiver to the display.
5)
Last step: plug in a HDMI or MPD from the source to wall plate.
6)
Source will now transmit to display.
*If the Cat Cable is connected correctly a solid amber light with a flashing
green light will turn on at the ethernet port. This means there is a good
link and that data is being transmitted between the wall plate and receiver.
**If you will be using the unit directly into a NON-POE Provider (AVR,
Projector, Display, or other HDBaseT receiver), you can power it using a 5V
MINI
USB Type power supply. We recommend the AC-PSU-5V-MINI-USB.