Aqua Pulse Spas Shelly Deluxe Spa Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Whirlpool Aqua Pulse Spas Shelly Deluxe Spa herunter. Aqua Pulse Spas Shelly Deluxe Spa 17 Seiten.

Seite drucken

testing. When you test at other pool or spas stores, you can use the test results they give you to calculate any

adjustments you need to make using our how to balance the water instructions. You do need to be careful to not

just apply the amounts of chemical that they tell you to apply. The reason for this is that they might set the

parameters differently to what your spa requires.

Water chemistry test history showing results for Free Chlorine, Total Chlorine, pH, Alkalinity, Calcium Hardness &

Cyanuric Acid, must be kept as a dated once-a-month digital reference as part of your warranty terms. This test

history will be required in the event of a warranty claim. It is a requirement of the Warranty Terms to keep dated

once-a-month digital water test result of the water chemistry supplied from a professional pool or spa store. Your

warranty will be made void if you cannot show these results.

THE FOLLOWING CHEMICALS CANNOT BE USED IN YOUR SPA:

Bromine, Liquid chlorine, Hydrochloric acid, Trichlor chlorine, Dichlor chlorine, Stabilized chlorine, Cyanuric acid,

Magnesium, Hydrogen peroxide & Polyhexamethylene biguanide.

SOME OF THESE PRODUCT WILL MAKE YOUR FIBREGLASS SPA SHELL DEFORM IN SHAPE & CREATE

BUBBLES & HOLES IN THE SPAS ACRYLIC LAYER.

Your warranty will be made void if you use any of these products.

HOW TO REMOVE YOUR SPAS FILTER

Remove the flat head screw in the filter box face and dispose of it.

DO NOT REINSTALL THE SCREW.

Slide the face plate on the filter box vertically upwards until it separates away from the filter box.

Remove the leaf catcher by sliding it horizontally towards the centre of the spa.

To remove the filter, turn the handle on the top of the filter anti-clockwise until

you can lift the filter out of the filter box.

To install the filter, place the filter inside the filter box and turn the handle on the

top of the filter clockwise. Do not turn the filter with force just gently screw it in

so it can be easily removed for weekly cleaning.

To install the leaf tray slide it horizontally into the filter box, make sure the tray sits in the middle of the

locating grooves. The filter face plate will not install if you have the leaf tray outside of the locating grooves.

To install the face plate on the filter box slide the face plate vertically downwards.

Note:

The black filter face will go white where the water and air meets from chemical exposure.

This is unpreventable and can occur very quickly if you over sanitize the water.

WEEKLY FILTER CLEANING

Once a week remove the filter from the spa and wash thoroughly with a garden hose, then place the filter in a

bucket of cold water and add 125ml of Filter Cleaner & Degreaser #9 or Filter Cleaner & Degreaser 1Litre Bottle.

Agitate the water and leave the filter submerged to soak for 24 hours. After 24hours remove the filter, wash it

thoroughly and allow it to completely dry out in an area exposed to the sun or wind.

It is recommended to purchase a spare filter and alternate between the filter each week to make the cleaning

process easier. Filters which are not cleaned weekly can cause your spa to stop cleaning & heating.

You filter needs to be replaced every twelve months, however if you are rotating between two filters this will

require replacement every two years. To order your replacement filter

supplies-parts/universal-cartridge-filter-2/

https://www.aquapulsespas.com.au/spa-