DFI KS156P-EHL Handbuch zur Schnellinstallation - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Industrie-PC DFI KS156P-EHL herunter. DFI KS156P-EHL 7 Seiten. 15.6" & 21.5" industrial touch panel pc

Seite drucken

Panel Mount - KS215P-EHL

Step 1:

Select a place on the panel (or wall) where you will mount the Panel PC.

Step 2:

Cut out a shape on the panel that corresponds to the Panel PC's rear dimensions (359mm x

194mm) and ensure that the Panel PC can be fitted into the panel properly.

The flat panel thickness is less than 3mm. Be sure to route or trim down the thick wall to 3 mm

or slightly less for the clamps to recess and be compatible with your wall or enclosure.

Step 3:

Insert the Panel PC from the outside surface of the panel into the mounting hole until it is

properly fitted against the panel.

Step 4:

Position the mounting clamps along the rear edges of the Panel PC and insert them into the

slits around the Panel PC.

Step 5:

The first and second clamps must be positioned and secured diagonally prior to mounting the

rest of the clamps. Tighten the clamp's screw using an electric screwdriver by pressing the

white plastic cap onto the back of the panel. The illustration below shows that all clamps are

properly mounted.

Quick Installation Guide | KS156P-EHL & KS215P-EHL