DFI ST102-SD Installationshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationshandbuch für Industrie-PC DFI ST102-SD herunter. DFI ST102-SD 7 Seiten.

Installing a Memory Module

The system board is equipped with two memory slots. Please use the following

procedure to install SODIMM modules.

Grasp the module by its edges and align the memory's notch with the socket's

notch; then insert the memory into the socket at an angle and push it down

until you feel a click.

Notes:

The system supports dual-channel configuration. To enable dual-channel,

populate both SODIMM sockets.

If installing only one memory module, please install it on the memory socket

labeled DIMM1 (the one closer to the center of the board).

The SODIMM sockets can only accommodate DDR4 memory modules. Please

do not install other types of memory modules.

DIMM1

DIMM2