AVS Chrome Hood Shield Einbauanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Einbauanleitung für Zubehör für Kraftfahrzeuge AVS Chrome Hood Shield herunter. AVS Chrome Hood Shield 2 Seiten.
Auch für AVS Chrome Hood Shield: Installationsanleitung Handbuch (7 seiten), Installationsanleitung Handbuch (7 seiten), Installationsanleitung Handbuch (6 seiten), Installationsanleitung Handbuch (6 seiten), Installationsanleitung Handbuch (6 seiten), Installationsanleitung Handbuch (6 seiten), Installationsanleitung Handbuch (6 seiten), Installationsanleitung Handbuch (10 seiten), Installationsanleitung Handbuch (6 seiten)

Seite drucken
AVS Chrome Hood Shield Einbauanleitung
Installation Steps
Remove the corresponding fasteners from the rubber trim piece. This is necesary in order for the hood shield flanges to slide under the
rubber trim piece. NOTE: It may be necessary to remove additional fasteners in order to accomodate the flange, depending on size.
3
Position the hood shield with the flanges sliding between the hood
and rubber seal. Align holes.
4
Insert (6) screws through rubber trim and into recep-
tacles and apply pressure while tightening screw to
6
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in
our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top
quality in terms of fit, durability, finish and ease of installation.
NOTE: Actual application may vary slightly from illustrations.
secure to hood.
hood shield
receptacle
rubber
screw
Insert (6) receptacles UNDER rubber trim and through
5
Lower hood, adjust hood bumper stops to ensure
hood shield clears grille and headlights. Install bump
ons at pre-cleaned locations on the painted hood/
trim
7
Page 2 of 2
Discover various stone and bug deflectors in our online store.
front edge of
hood
fastener
rubber trim
hood shield, and then into hood.
rubber trim
receptacle
fender surface.
hood shield