CPG 351CHCT1A Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Backofen CPG 351CHCT1A herunter. CPG 351CHCT1A 15 Seiten. Electric cook & hold ovens
Auch für CPG 351CHCT1A: Benutzerhandbuch (14 seiten)

Seite drucken

User Manual

Startup

Installation

1. Remove packing materials.

2. Peel off vinyl protective film from oven.

3. Before installation, please read instructions completely and carefully.

4. Prior to use, wipe down the unit with a dish soap and water solution. See Cleaning and Maintenance on page 14

for our recommended cleaning agents and further cleaning instructions.

5. For 351CHSP2 and 351CHUC2B: See Stacking Instructions on page 4.

6. Final installation location must be level and maintain the required clearances as seen in the spec table on page 3.

Electrical Connection

•

Verify that the electrical connection agrees with the

specifications on the rating plate located on the lower back

corner of the oven.

•

If the supply and equipment requirements do not agree,

do not proceed with installation. Contact your Cooking

Performance Group Service Department immediately.

•

All ovens are equipped with a 6 foot cord and NEMA 6-30P,

5-15P, or 6-15P plug. Please see the spec table on pg. 3 to

find the specific plug type for your unit.

Electrical Codes & Standards

The oven must be installed in accordance with:

•

In the United States of America:

1. State & local codes.

2. National Electrical Code, ANSI/NFPA-70 (latest edition).

•

In Canada:

1. Local codes.

2. Canadian Electrical Code, CSA C22.1 (latest edition).

Exhaust System

The unit must be installed in accordance with state and local codes, or in the absence of state or local

codes, with National Electrical Code ANSI/NFPA-70 and Standard for Ventilation Control and Fire

Protection of Commercial Cooking Operations NFPA 96. Otherwise, ventless systems must be

tested to the applicable UL Standard.