Allied Telesis CentreCOM GS980M Series Handbuch zur Schnellinstallation - Seite 10
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Schalter Allied Telesis CentreCOM GS980M Series herunter. Allied Telesis CentreCOM GS980M Series 20 Seiten. Gigabit ethernet switches
Seite drucken
To install the switch on the wall, perform the following procedure:
1. Place the switch in a table.
2. Install the four wall/equipment rack brackets to the sides of the
unit with the sixteen M3x6mm screws included with the switch.
Note: If you need to drill holes in the wall for the screws, perform
steps 3 to 7. Otherwise, go to step 8.
3. Have a person hold the switch on the wall at the selected location
while you use a pencil to mark the wall with the locations of the
four screw holes in the four brackets (one screw per bracket).
4. Place the switch on a table or desk.
5. Use the stud finder to check for hot electrical wires at the
locations of the screw holes.
10
CentreCOM GS980M Series Quick Installation Guide