DFRobot TEL0051 Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Kontrolleinheit DFRobot TEL0051 herunter. DFRobot TEL0051 20 Seiten. Gps/gprs/gsm module v3.0

14. 3. 2016

http://www.dfrobot.com/wiki/index.php/GPS/GPRS/GSM_Module_V3.0_(SKU:TEL0051)

GPS/GPRS/GSM Module V3.0 (SKU:TEL0051) Robot Wiki

Pin Out

Module driver pin jumpers: Applying the Module Pin Jumpers(J10J12) will allocate Pin 3,4,5

for driving the module. Removing the jumpers will release the above Pins, and you could connect

the driver pins to the other digital pins on your board to avoid the pin conflict.Read more

(http://www.dfrobot.com/forum/index.php?topic=17186.msg21374#msg21374)

NOTE: Two jumper caps of GPS/GSM UART SELECTION have been changed to a

switch."Take off the jumper caps" do the same function of "slid the switch in the middle".

More details about switches:

Switch S1: PC upload program to Arduino board/PC communicates with GPS/GPRS/GSM

Module( Arduino programming/module communication).

Switch S2: GPS/GPRS/GSM Module directly connects with PC through USB port or

module communicates with Arduino board, which communicates with PC(USB/Arduino

serial communication).

Tutorial

Hardware:

Arduino Uno

GPS/GPRS/GSM Module V3.0

SIM Card

2/20