DFRobot YDLIDAR GS2 Benutzerhandbuch - Seite 12
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Mikrocontroller DFRobot YDLIDAR GS2 herunter. DFRobot YDLIDAR GS2 13 Seiten. Lidar
Seite drucken4 CAUTION
4.1 Ambient Temperature
When the working environment temperature of GS2 is over high or over low, it will affect the
accuracy of the distance measuring system. It may also damage the structure of the scanning system
and reduce the service life of the GS2 lidar. Avoid using in high temperature (>50 degrees Celsius)
and low temperature (<0 degrees Celsius) conditions.
4.2 Ambient Lighting
The ideal working environment of GS2 is indoor, and the indoor environment light (including
no light) will not affect the work of GS2. However, please avoid using strong light sources (such as
high-power lasers) to directly illuminate the GS2 vision system.
If the users need to use it outdoors, please avoid the GS2's vision system directly facing the sun,
which may cause permanent damage to the vision system's photosensitive chip, which will invalidate
the range finding.
The GS2 standard version will cause interference in the distance measurement under the
conditions of strong sunlight reflection outdoors, please pay attention to it.
4.3 Power Supply
During the development process, since the drive current of the USB interface of each platform
or the USB interface of the computer may be too low to drive the GS2, the external power supply of
the +5V to the GS2 needs to be provided through the USB_PWR interface of the USB interface
board. It is not recommended for use mobile phone power bank because the voltage ripple of power
bank is too large.
10 / 11