Allied Telesis Patch 1 PN 613- Freigabemitteilung
Blättern Sie online oder laden Sie pdf Freigabemitteilung für Schalter Allied Telesis Patch 1 PN 613- herunter. Allied Telesis Patch 1 PN 613- 14 Seiten. At-9400 series basic layer 3 gigabit ethernet switches at-s63 version 3.1.0 patch 1 software release notes
Seite drucken
AT-9400 Basic Layer 3 Gigabit Ethernet Switches
Please read this document before you begin to use the management software.
Supported Platforms
AT-S63 Version 3.1.0 Management Software is supported on the following AT-9400 Gigabit
Ethernet Switches:
Basic Layer 3 Models
Note:
AT-9400 Basic Layer 3 Switches running Version 2.1.0 or earlier of the AT-S63 Management
Software have to be upgraded to Version 2.2.0 before they can be upgraded to Version 3.1.0.
For the Internet locations of the management software for Allied Telesis products, refer to
"Obtaining Management Software Updates" on page 14.
This version is not supported on the following AT-9400 Switches:
Layer 2+ Models
For information on the availability of future releases of the management software for the Layer 2+
switches, contact your Allied Telesis sales representative.
This release supports the following redundant power supply on the AC models:
AT-RPS3204
For a list of supported GBIC, SFP, and XFP modules, contact your Allied Telesis sales
representative.
PN 613-000915 Rev A
AT-S63 Version 3.1.0 Patch 1
Management Software for the
Software Release Notes
AT-9424T (AC)
AT-9424Ts (AC)
AT-9424Ts/XP (AC)
AT-9448T/SP (AC)
AT-9448Ts/XP (AC)
AT-9408LC/SP (AC)
AT-9424T/GB (AC)
AT-9424T/SP (AC)
AT-9424T/GB-80 (DC)
AT-9424T/SP-80 (DC)
AT-S63 Version 3.1.0 Patch 1 Software Release Notes
1
Allied Telesis, Inc.