Allied Telesis Rapier AR 700 Series Handbuch zur Schnellinstallation - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Schalter Allied Telesis Rapier AR 700 Series herunter. Allied Telesis Rapier AR 700 Series 13 Seiten. How to set up pppoe between a linux client and access concentrator
Auch für Allied Telesis Rapier AR 700 Series: So konfigurieren Sie (6 seiten), Handbuch zur Fehlersuche (8 seiten), Fehlersuche (5 seiten), Anleitungen (8 seiten)
Seite drucken
4
Selecting a Site
The router can be installed in a standard 19-inch rack or on a level surface such
as a desktop or bench. When installing the router, choose a site that:
■
Allows adequate airflow around the router and its vents.
■
Is free of dust and moisture.
■
Will maintain an ambient temperature range of 0 to 40º C (32 to 104º F) and
a humidity range of 5 to 95% non-condensing.
■
Has a reliable and earthed (grounded) power supply circuit, preferably
dedicated and filtered.
■
Does not expose cabling to sources of electrical noise, such as radio
transmitters, broadband amplifiers, power lines, electric motors, and
fluorescent fixtures.
■
Allows easy access to the router's power and cable connections.
Installing the Router
All AC and DC versions of this equipment must be earthed.
Follow these steps to install the router:
1.
Read the safety information
For safety information, see the Safety and Statutory Information booklet. A
copy of this booklet is supplied with each router, and can also be found on
the Documentation and Tools CD-ROM or at www.alliedtelesyn/
documentation/documentation.html.
2.
Gather the tools and equipment you will need
If installing a DC version of the router, you will need a DC power source,
DC supply cable, and wire strippers (see step 9).
If the router is to be connected to a redundant power supply, you will need
a redundant power supply unit and cable (see step 8).
3.
Unpack the router
Verify the package contents. If any items are damaged or missing, contact
your sales representative.
4.
Install expansion options
If you purchased optional Port Interface Cards (PICs) or a Network Service
Module (NSM), install them now by following their individual Quick
Install Guides. These guides can be found on the Documentation and Tools
CD-ROM or at
www.alliedtelesyn.co.nz/documentation/documentation.html.
If you purchased an optional PCI or Mini Accelerator Card (PAC or MAC)
install it now by following the instructions in the AR Router Hardware
Reference.
AR700 Series Router
Software Release 2.6.1
C613-04027-01 REV E