DG FPGA Einrichtung

Blättern Sie online oder laden Sie pdf Einrichtung für Computer Hardware DG FPGA herunter. DG FPGA 14 Seiten.
Auch für DG FPGA: Einrichtung (5 seiten), Einrichtung (20 seiten), Einrichtung (8 seiten), Einrichtung (10 seiten), Einrichtung (18 seiten)

Seite drucken

dg_nvmeip_raid0x2_fpgasetup_xilinx_en.doc

FPGA setup for 2-Ch RAID0 by NVMe-IP Demo

This document describes the FPGA and test environment setup for running 2-ch RAID0 by using

NVMe-IP, NVMeG3-IP, or NVMeG4-IP demo on FPGA development board by using the

AB17-M2FMC board or AB18-PCIeX16 board with Quad M.2 card for connecting with two M.2

NVMe SSDs. It is recommended to use the same SSD models for RAID0 operation to match SSD

characteristic. User controls test operation via Serial console.

1 Test Environment setup

To run the demo on FPGA development board, please prepare following environment.

1) FPGA development board

NVMe-IP

NVMeG3-IP

NVMeG4-IP

2) The adapter of M.2 SSD

a. AB17-M2FMC board

https://dgway.com/ABseries_E.html

b. AB18-PCIeX16 board and Quad M.2 card

https://dgway.com/ABseries_E.html

https://www.asrock.com/mb/spec/product.asp?Model=ULTRA%20QUAD%20M.2%20CA

3) Two M.2 NVMe SSDs, inserting to M.2 connector on AB17/Quad M.2 card

4) For AB18 only, ATX power supply for PCIe adapter board

5) Xilinx power adapter for FPGA board

6) Two micro USB cables for programming FPGA and Serial console, connecting between

FPGA board and PC

7) PC installing Xilinx programmer software (Vivado) and Serial console software such as

TeraTerm and HyperTerminal

15-Jul-21

: KCU105 (AB17)

: ZCU106 (AB17), ZCU102 (AB17)

: ZCU106 (AB17), VCU118 (AB18 + Quad M.2 card)

Rev2.1

15-Jul-21

Page 1